There are misleadingly two different versions of this Viltrox RB10 light on the market. This is a newer and better version with bi-LEDs with wider color temperature control and brighter LEDs.
The Viltrox RB10 panel has 36 bi-LEDs, which enable a very wide range of color temperature control in the 2500-8500K range. In addition, the panel has 24 RPG LEDs that produce 300 different colors. The hue can be adjusted manually or the light can be set to a mode where the colors change automatically at the desired speed. It is worth noting that the brightness of the color LEDs cannot be adjusted. The brightness of the bi-LEDs is adjustable in the normal way. The included magnetically mounted diffusion plate softens the light.
The light can be attached:
- On top of the camera / accessory shoe
- For Gopro mounting (so-called pivot mounting)
- On the base (standard 1/4 “thread at the bottom)
The light comes with a bottom-mounted accessory shoe fastener with a folding joint. It is possible to chain the light attached to the edges with other lights. This is accomplished with a male shoe on one side and a female on the other. There are 1/4 “female threads on the top and bottom of the light.
The light is powered by a Sony NP-F battery, which must be purchased separately. One battery can be attached to the light. The light life specified by the manufacturer is approximately 2.5 hours with a 2100mAh NP-F550 battery. The light also has a standard dc005 connector if you want to use the light on mains power. The power cord is not included.
The following are suitable batteries light:
NP-F330, NP-F530, NP-F550, NP-F560, NP-F570 , NP-F740, NP-F750, NP-F760, NP-F770 , NP-F930, NP-F940, NP -F950, NP-F960, NP-F970
- Features: 10W bi-led, 5W RBG
- Power control: 20-100% (only with bi-LEDs)
- Max. brightness 980 LM, 1180Lux (0.5m)
- Number of LEDs: 36 bi-color and 24 RGB
- Lighting angle: 120 degrees
- RGB color tones: 300 pcs
- Color index: Ra 95+
- Mitat: 168 x 98 x 32mm
- Weight: about 190g